China Standard Rubber Bellows Pipe Joint Flexible Rubber Coupling with Flange

Product Description

Product Description:

Single ball rubber joint is a kind of pipeline joint which is high-flexibility,high-gas tightness,resistance to medium and climate. Limit displacement and Prevent pull off  rubber joint is usually composed of inner rubber layer,fabric reinforcement layer(reinforcement layer have multilayer frictioning nylon cord fabric),middle rubber layer,outer rubber layer,top reinforce metal ring or bead ring. After high pressure, high temperature vulcanization and become. It can reduce the vibration and noise of pipeline.It can also compensate for the Thermal expansion and  cold contraction caused by temperature changed.
 

Product features:

1.Small volume, light weight, good elasticity, easy installation and maintenance.
2.After installation, it can assimilate horizontal, axial and angular displacement caused by pipeline vibration.
3.After installation, it can reduce the noise which produced by the pipeline and water pump etc.
4.Inside has seamless high pressure rubber joint more effectively prevent rubber joint’s inner walls from being corroded by corrosive medium in high temperature resistance,acid and alkali resistant,oil resistance pipeline and raised working life.

 

Technics  condition

Item/type

KXT-1

KXT-2

KXT-3

work pressure MPa( kgf/cm 2 )

1.0(10 )

1.6 ( 16 )

2.5 ( 25 )

explosion pressure MPa( kgf/cm 2 )

2.0 ( 20 )

3.0 ( 30 )

4.5 ( 45 )

vacuum degree KPa(mm/Hg)

53.3 ( 400 )

86.7 ( 650 )

100 ( 750 )

 Applicable  temperature

-15 ºC~ 115 ºC special can reach -30 ºC ~ 250 ºC

Applicable medium

Air,compressed air,water,sea water,hot water,oil,acid,alkali etc.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flexible flange coupling

Use of Flexible Flange Couplings in Applications Requiring Electrical Isolation

Yes, flexible flange couplings can be used in applications requiring electrical isolation between shafts. In certain industrial scenarios, it is essential to electrically isolate the connected equipment or shafts to prevent the flow of electrical current between them. This requirement is common in applications involving sensitive electronic components, motors, generators, or systems where grounding issues need to be avoided.

To achieve electrical isolation, flexible flange couplings can be designed using non-conductive or insulating materials. Some key considerations for using flexible flange couplings in such applications are as follows:

  1. Material Selection: Instead of metallic materials commonly used in standard couplings, such as steel or aluminum, the flexible flange couplings for electrical isolation purposes can be manufactured from non-conductive materials like thermoplastics, certain composites, or specially formulated insulating elastomers.
  2. Insulating Sleeve: Some flexible flange couplings may feature an insulating sleeve or barrier between the two flanges. This sleeve prevents direct contact between the flanges and acts as an electrical barrier, ensuring isolation between the shafts.
  3. Dielectric Strength: When selecting materials for electrical isolation, it is crucial to consider their dielectric strength, which determines the maximum voltage they can withstand without breakdown. The materials chosen should have adequate dielectric strength to suit the application’s electrical requirements.
  4. Performance Considerations: It is important to note that while achieving electrical isolation, the selected materials should still meet the necessary performance criteria for the specific application. The coupling must retain its ability to transmit torque, accommodate misalignment, and provide damping characteristics as required.
  5. Environmental Factors: Consideration should also be given to the environmental conditions of the application, such as temperature, humidity, and chemical exposure. The chosen materials should be compatible with the operating environment to ensure long-term reliability.

By carefully selecting appropriate materials and incorporating insulating features, flexible flange couplings can effectively provide electrical isolation between shafts while fulfilling the mechanical and functional requirements of the machinery or equipment. This enables the safe and reliable operation of electrical systems without the risk of electrical currents passing through the coupling and connected components.

flexible flange coupling

Standard Sizes and Specifications of Flexible Flange Couplings

Flexible flange couplings come in various sizes and specifications to accommodate different applications and torque requirements. The specific sizes and specifications may vary depending on the manufacturer and the intended use. However, there are some common standard sizes and specifications available in the market:

  • Coupling Size: Flexible flange couplings are available in a range of sizes, typically measured in millimeters (mm) or inches (in). Common sizes include diameters ranging from a few millimeters to several hundred millimeters, catering to different shaft diameters.
  • Torque Capacity: The torque capacity of flexible flange couplings can vary widely. Couplings with higher torque capacities are used in heavy-duty applications, while those with lower torque capacities are suitable for smaller, less demanding systems.
  • Material: Flexible flange couplings can be made from various materials, including steel, aluminum, and stainless steel. The choice of material depends on factors such as the application environment, torque requirements, and the need for corrosion resistance.
  • Number of Flanges: Flexible flange couplings typically have two flanges to connect two shafts. However, some designs may have more flanges to provide additional stability and alignment support.
  • Flexibility: The flexibility of the coupling is crucial for accommodating misalignment. The amount of angular, axial, and parallel misalignment that the coupling can handle should be considered during the selection process.
  • Operating Temperature: The temperature range within which the coupling can operate effectively should be specified. High-temperature applications may require couplings with special materials or heat-resistant designs.
  • Speed Rating: Flexible flange couplings are rated for specific rotational speeds. It’s essential to ensure that the selected coupling can handle the required speed without causing vibration or premature wear.
  • Backlash: Some couplings are designed to have minimal or zero backlash, which is crucial for applications requiring precise motion transfer, while others may allow for some level of backlash.
  • Installation Method: The method of installation can vary between different flexible flange coupling designs. Some may require set screws or clamping elements, while others may have keyways or other attachment methods.

It’s important to consult the manufacturer’s datasheets and technical specifications to find the exact sizes and specifications of flexible flange couplings available from different suppliers. Additionally, considering the specific requirements of the application and seeking expert advice can help in selecting the right flexible flange coupling for optimal performance and longevity in the mechanical power transmission system.

flexible flange coupling

Flexible Flange Coupling in Mechanical Power Transmission

A flexible flange coupling is a type of coupling used to connect two shafts and transmit mechanical power from one shaft to another. It is designed to accommodate misalignment, parallel, angular, and axial, between the connected shafts. The coupling consists of two flanges with interlocking teeth or ridges on their mating faces, and a flexible element, often made of elastomeric material, positioned between the flanges.

The function of a flexible flange coupling in mechanical power transmission is as follows:

  1. Compensation for Misalignment: One of the primary functions of a flexible flange coupling is to compensate for misalignment between the shafts. Misalignment can occur due to various factors, such as manufacturing tolerances, thermal expansion, or vibrations. The flexible element allows the flanges to move relative to each other, accommodating both angular and parallel misalignments without imposing significant loads on the connected machinery.
  2. Shock Absorption: The flexible element in the coupling acts as a shock absorber, dampening sudden shocks and vibrations that may arise from the equipment or system. This helps protect the machinery from damage and minimizes wear and tear, enhancing the overall service life of the system.
  3. Torsional Flexibility: Flexible flange couplings offer torsional flexibility, allowing them to transmit torque smoothly between the shafts, even when the two shafts are not perfectly aligned. This capability is essential in applications where there are frequent starts, stops, or changes in load, as it reduces the risk of stress concentration and premature failure.
  4. Isolation of Vibrations: Vibrations generated in one shaft due to imbalances, misalignment, or other factors can be isolated from the other shaft by the flexible element, preventing the vibrations from propagating throughout the entire system and reducing noise levels.
  5. Easy Installation and Maintenance: Flexible flange couplings are relatively easy to install and maintain. The split design of the flanges allows them to be assembled around the shafts without the need to disassemble the entire system. This feature simplifies installation and reduces downtime during maintenance.

Conclusion: Flexible flange couplings play a crucial role in mechanical power transmission by providing a flexible and reliable connection between rotating shafts. Their ability to compensate for misalignment, absorb shocks, transmit torque smoothly, and isolate vibrations makes them suitable for a wide range of applications in various industries.

China Standard Rubber Bellows Pipe Joint Flexible Rubber Coupling with Flange  China Standard Rubber Bellows Pipe Joint Flexible Rubber Coupling with Flange
editor by CX 2024-04-19

flexible flange coupling

As one of leading flexible flange coupling manufacturers, suppliers and exporters of products, We offer flexible flange coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of flexible flange coupling

Recent Posts